How-To Overview

It doesn't get any easier than this! Check out this quick overview of how to paint your own graphical curb address with eye-popping appeal!

Every stencil kit comes with detailed, step-by-step instructions on how to paint your curb address and get professional results. Below is a quick overview of the process.

1. Get all your materials together: your stencil kit, masking tape and the paint colors you are going to use. You may want to bring some newspaper or a roll of waxed paper for overspray protection.
2. Pick the location on your curb where you want your address to be and anchor the background template provided with your kit with masking tape. Place 2" masking tape, newspaper or other suitable material around the perimeter of the background
   template as an overspray guard.
3. Spray your background using the the appropriate paint color for your desired color scheme.
4. Beginning with either the graphic or the house numbers, insert the stencils into the alignment tabs in the background template and anchor them with a small piece of tape.
5. Cover areas not to be painted with a piece of newspaper, waxed paper, piece of cardboard, etc. For example, cover the graphic background area when painting the numbers, and vice versa.
6. Spray your numbers/graphic with the desired paint color. Some graphics require two or three layers to complete. Allow paint to dry between layers.
7. Apply the glass reflector beads to the numbers while the paint is still wet.
8. Allow a few minutes for the paint to dry and remove stencils.

That's it! That is all it takes to do to have an attractive and professional looking curb address with eye-popping appeal!